USBASP USB ISP Programmer Downloader for Arduino ATMEL AVR

, ,


Product ID: 20908 SKU: MOD-20908 Categories: , , Tags: , , , , , , ,


This AVR Programmer is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed.


Support all 8-bit AVR microcontrollers
Reminder: The driverless version cannot be connected to some public version software, only the wisdom peak software 1.681.72. Please note!
Use USBASP to burn AT89S51AT89S52, please use the DC jack to supply power to the small system separately or you can’t burn it.
USBASP download line items include:
USB-ISP (5V version)
IDC10 core cable (about 75CM long)
This downloader features
1. No need to install the driver. After plugging in the USB port of the computer, the computer will automatically recognize the input device of the computer, and then automatically drive the downloader. The device can be used in the lower right corner of the computer. The red indicator light is on. When the program is programmed, the green indicator light is on. Perfect support for WN2K, WINXP, VISTA, WN7 and other operating systems.
3, must use progisp1.68 and above the host computer software
3, using USB port power supply, 500mA can restore the fuse, there is short-circuit over-current protection, the target board can also be powered from USB at the same time.
3. The download completion does not affect the operation of the target board.
4, support SS1 and AVR chip burning, the speed is faster than the parallel port ISP, more stable: is the best choice for notebooks and electric 1 brain without parallel port. (3.3V version can not support Ss1 burning, Ss1 series 3.3V can not be downloaded).
1s, using the latest version of ultra-stable firmware, no need for hardware jumper selection when downloading at low speed, download speed is faster and more stable.
16, using the standard IDC10 interface
The steps of normal programming. First transfer the programming data, select the fuse bit to connect the target board, point automatically, wait for the download programmer indicator to light green, select the corresponding button to operate. (The operation status can be judged according to the color change of the indicator light during operation)

Scope of Application

Partial list with support chip
51 series single chip microcomputer
AT89SS1, AT89S52AT89LS51 AT89LS52 AT89LS53

AVR series MCU:
200 years AT90S1 AT90S2313.AT90S2323. AT9OL S2323.AT90S2343. AT9OL S2343.AT90S4433. AT9OD S4433, AT90S8515, AT90S8535, AT90LS8535, ATmega48, AT mega48V, AT mega88, ATmega88V, AT megal68, ATmegal68V. ATmega8, ATmega8L, ATmega16, AT megal6LAT mega32, ATmega32LAT mega64, ATmega64L,
ATmegal61, AT megal61l, ATmegal63, atmegal63l, ATmega323, ATmega323LATmega8515, AT mega8515L, ATmega8535, ATmega8535L, ATmegal03, ATmega103L, ATmegal 28, ATmegal 28L.A.
Tmegal62. ATmegal62LAT megal69 ATmcga169L,
ATtiny12ATtiny12L, ATiny13 ATtiny13LATtinyl5, ATtiny15LATtiny22 ATiny221L ATtiny26, A
AT89S51 AT89S52 AT89S53 AT89S8253 AT89S2051 AT89S8252 AT89S4051

AVR series
AT90can128 AT90can32 AT90can64 AT90pwm2 AT90pwm3 AT90s1200 AT90s2313 AT90s2323 AT90s2343 AT90s4414 AT90S8515 AT90S8535 AT90usb1286 AT90usb1287
Atmega103 Atmega128 Atmega1280 Atmega1281 Atmega16 Atmega161 Atmega162 Atmega163 Atmega164 Atmega165 Atmega168 Atmega169 Atmega2560 Atmega2561 Atmega32 Atmega323 Atmega324 Atmega325 Atmega3250 Atmega3259 Atmega329 Atmega3290 Atmega406 Atmega48 Atmega64 Atmega640 Atmega644 Atmega645 Atmega6450 Atmega649 Atmega6490 Atmega8 Atmega8515 Atmega8535 Atmega88
Attiny11 Attiny12 Attiny13 Attiny15 Attiny22 Attiny2313 Attiny24
Attiny25 Attiny26 Attiny261 Attiny28 Attiny44 Attiny45 Attiny46
Attiny461 Attiny84 Attiny85 Attiny861