ST-Link V2 USB Emulator Downloader Programmer STM32, STM8

, ,


Product ID: 20836 SKU: STM-20836 Categories: , , Tags: , , , , , ,


ST-Link V2 Programming Unit Mini STM8 STM32 Emulator Downloader with Cable.


  • The ST-Link V2 Programming Unit Emulator Downloader, supporting downloading and debugging of the full range of STM32 SWD and STM8 SWIM
  • The wiring is very simple! It’s convenient and practical because the interface definition is marked directly on the case
  • It supports both 5V and 3.3V power outputs, and all I/O output ports are protected
  • You can easily observe the working status with red and blue LED indicators
  • It can protect your computer motherboard since the internal board of this programmer is with 500MA self-recovery fuse

Supported Software Versions:

  • Supporting the full range of STM32 SWD debugging interface
  • Support the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD etc. are supported); supported software versions as follows:
  1. ST-LINK Utility 2.0 and above; 
  2. STVD and above;
  3. STVP 3.2.3 and above; 
  4. IAR EWARM V6.20 and above; 
  5. IAR EWSTM8 V1.30 and above; 
  6. KEIL RVMDK V4.21 and above

Package List

  • 1 x V2 Emulator Downloader Programmer Support STM8 STM32
  • 1 x DuPont line