Arduino Nano v3, USB-C (Clone, Soldered)

, ,

C-1 , R-4 , I-2

 35.0

Product ID: 20505 SKU: ARDU-20505 Categories: , , Tags: , , ,

Description

This is a Nano V3.0 ATmega328P 5V 16MHz Type-C.

This Arduino-compatible Nano V3.0 micro-controller is a small, complete, micro-controller board based on the ATmega328 MCU. It has more or less the same functionality as the Arduino Duemilanove, but in a smaller package. It lacks only a DC power jack, and uses the more compact Mini USB (Mini-B) connector instead of a standard USB connector.

Nano V3.0 ATmega328P 5V 16MHz Type-C is compatible with Arduino programs and the Arduino IDE. This version of the Nano uses the CH340G USB interface controller.

It can be powered via the Mini-B USB connection, a 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

The type-C usb is more convenient to use and small in size.

It has exactly the same pins as the common Nano board.

The microprocessor is ATmega328 (Nano3.0).With Type-C USB interface, it also has 14 digital input/output ports (6 of which can be used as PWM output), 8 analog inputs, a 16MHz crystal oscillator, an ICSP header and a reset button.

Power supply: Type-c USB interface power supply and external vin connection 7~12V external DC power supply.

Pin-out

Specifications

  • Processor: ATmega328
  • Working voltage: 5V
  • Input voltage (recommended): 7-12V
  • Input voltage (range): 6-20V
  • Digital IO pins: 14 (6 of which are used as PWM outputs) (D0~D13)
  • Analog input pins: 6 (A0~A5)
  • IO pin DC current: 40mA
  • Flash Memory: 32KB
  • SRAM: 2KB
  • EEPROM: 1KB (ATmega328)
  • Working clock: 16 MHZ
  • PCB Size: 43mm x 18mm

Package List

  • 1 X NANO Board (without cable) – Soldered

 

Reviews

There are no reviews yet.

Be the first to review “Arduino Nano v3, USB-C (Clone, Soldered)”

Your email address will not be published. Required fields are marked *

You may also like…